SE Output Stage only amplifier

A new SE tube amplifier project from DT667?  Here it is people.

The "Green God" by DT667.  

The motivation for building the "Green God" was to have a tube amp that required the use of a separate preamplifier.  DT667 owns several vintage and DIY tube preamps.

DT667 revised a SE 6AQ5 console stereo amp with 5751 driver stage into a SE Output Stage Only stereo amplifier.

The circuit is very simple : FW UF4007 SS rectifier into a CRCRC power supply filter with bleeder resistor added across the last cap for safety.   

The 6.3V heater circuit utilizes a faux center tap for hum-free operation.

The 6AQ5 output stage tetrode connected with local feedback and cathode biased in a traditional manner per standard RCA tube manual recommendations.

Currently doing some subjective listening tests with the new amp and a DIY  12SN7  dual triode preamp - a one tube preamp that features a LOW DCR primary PT (4 ohms).

A Lenovo ideapad 330S playing Qobuz through a Topping E30 DAC provides streaming audio selections.

A schematic with operating points and additional photos are posted below.

Enjoy.

DT667   1022/2021